| JM734449/Inner/TS Timken Tapered Roller Bearings | Limiting speed:5300 r/min; A3:3.2 mm; R1:22 mm; d:34.925 mm; Db1:88 mm; Thread grub screw G2:5/16-24 UNF; Recommended diameter for attachment bolts, mm G:12 mm; Basic static load rating C0:15.3 kN; DN:6.5 mm; Recommended tightening torque for grub screw:6.5 N·m; Basic dynamic load rating C:25.5 kN; J7:15 mm; RG:1/4-28 UNF; A1:13 mm; J:130 mm; GN:1/4-28 SAE-LT; Hexagonal key size for grub screw N:3.969 mm; |
| HM212049XS/HM212011EB Timken Tapered Roller Bearings | r1,2 min.:1 mm; Fatigue load limit Pu:0.345 kN; Db max.:70.8 mm; Static axial stiffness, preload class A:94 N/µm; Preload class A GA:110 N; ra max.:1 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Basic static load rating C0:8.15 kN; Static axial stiffness, preload class B:140 N/µm; d2:53.6 mm; Calculation factor e:0.68; db min.:49.6 mm; Preload class C GC:660 N; D2:66.85 mm; |
| XS/M734449XS/Space Timken Tapered Roller Bearings | ra max.:2 mm; Snap ring Seeger:SW 240; Snap ring in accordance with DIN 471:240x5; Fatigue load limit Pu:153 kN; r3,4 min.:0.6 mm; Mass bearing:16.5 kg; K:4 mm; Basic static load rating C0:1400 kN; D:240 mm; b1:7 mm; Calculation factor kr:0.4; C2:6.4 mm; -:0.2 mm; r min.:2 mm; C:108 mm; C1:95.2 mm; Ca1:89 mm; das:186 mm; d:160 mm; Limiting speed:500 r/min; |
| M88040XA/0.3 Timken Tapered Roller Bearings | A3:3.2 mm; A1:14 mm; Recommended diameter for attachment bolts, mm G:14 mm; Limiting speed:850 r/min; Recommended diameter for attachment bolts, inch G:0.5625 in; B1:56.3 mm; Recommended tightening torque for grub screw:16.5 N·m; Basic dynamic load rating C:33.2 kN; Rα:45 °; A5:23 mm; A:39 mm; B4:6.75 mm; Db1:102 mm; J:148.5 mm; Housing:FYTB 509 M/VZ033; Hexagonal key size for grub screw N:4.763 mm; |
| HH234031XA/9.7 Timken Tapered Roller Bearings | Accessories:Two Seals & Snap-Rin; Oil Speed Rating Open/Shielded n2:2900 rpm; Basic Static Radial Load Rating Co:228000 N; d:105.000 mm; Basic Dynamic Radial Load Rating C:247000 N; B:65.00 mm; Fillet Radius ra:3.00 mm; D:290.0000 mm; Sealed Speed Rating n3:1600 rpm; Grease Speed Rating Open/Shielded n1:2400 rpm; |
| X1S291250/Y7S29175 Timken Tapered Roller Bearings | Basic static load rating C0:35.5 kN; U:17 mm; Fatigue load limit Pu:4.25 kN; Fw:32 mm; Ew:37 mm; Limiting speed:14000 r/min; Mass needle roller and cage assembly:0.019 kg; Reference speed:13000 r/min; Basic dynamic load rating C:19 kN; |
| X4S898/Y5S892 Timken Tapered Roller Bearings | N:12.3 mm; Recommended diameter for attachment bolts, mm G:10 mm; Bearing:YAR 206-104-2RF/VE49; A:33 mm; Limiting speed:3800 r/min; Housing material:Composite for food a; Hexagonal key size for grub screw N:3.175 mm; Recommended diameter for attachment bolts, inch G:0.375 in; J:82.5 mm; Basic dynamic load rating C:19.5 kN; B:38.1 mm; A5:30.5 mm; T:42.2 mm; d:31.75 mm; s1:22.2 mm; A1:15.3 mm; Db:78 mm; |
| LM772748XR/6.4 Timken Tapered Roller Bearings | dk:92 mm; Basic dynamic load rating C:315 kN; G:M 72x4; d2 max.:162 mm; Material constant KM:330; d:70 mm; l7 min.:85 mm; l2 max.:349 mm; C1 max.:43 mm; α:6 °; l1 min.:132 mm; Basic static load rating C0:490 kN; r1 min.:1 mm; B:49 mm; h:265 mm; Mass rod end:10 kg; Specific dynamic load factor K:100 N/mm²; |
| HM807046XA/HM807010EC Timken Tapered Roller Bearings | Mass shaft washer:0.88 kg; d:110 mm; r1,2 min.:1.1 mm; d1:160 mm; B:11.5 mm; |
| X1S544090/Y3S544118 Timken Tapered Roller Bearings | Mass inner ring:0.011 kg; F:20 mm; d:17 mm; B:16.5 mm; r, r1,2 min.:0.3 mm; |